While we’ve got a good solution for larger cords, I noticed that our daily use electronics cords were a mess. Which is much less than ideal since it seems like my electronics are ALWAYS running low on battery. I can never remember which cord goes with which gadget. Oh how I wish every iPhone and iPad could just use the same charger!
Joe can look at any of the cords below and know exactly which electronic item they belong to. Me? I try to plug in every single cord until discovering the very last one fits 🙂 . Happens.Every.Time. Fortunately the problem was solved with this quick labeling trick.
For this project the pictures speak a thousand words. I just love how easy this one is.
First, pull out all the electronics cords you need labeled. I found 5 different ones that I use regularly. Using your label maker, print individual labels for each. I used label clear label maker cartridge with black ink.
Wrap a piece of washi tape around the end of your cord. Adhere the label to the washi tape. Then trim the edge of the washi tape to make a straight line.
I’m thrilled to be joining 19 AMAZING bloggers in a monthly challenge where we transform a thrift store item into something for our home. Naturally, I’m taking this challenge with organization in mine. My love for organizing is only met by my obsession for saving money, so this monthly series right up my alley! Make sure to stop by the b log on the third Thursday of every month to see what new organizing challenge I’ve tackled at thrift store prices!
Cords cords cords literally EVERYWHERE. Joe & I have more electronics and gadgets than we likely ever need. Our counters and night stands are filled with electronics and cords… to the point that I don’t even know which cord is for which gadget. I’m convinced we have cords sitting out that don’t even fit anything.
THIS is the box I picked up at the thrift store hoping to solve all my phone charging problems!
The first step after deciding how many electronics you’re going to store (I’m fitting 5 in this box) is to drill the holes. I first took a marker to denote where the holes should go. No need to use a pencil because you’ll be drilling through your marks (and painting). I didn’t feel like measuring was super important as it was pretty easy to eyeball.
No joke this was the first time I’ve ever used a drill. Obviously not an expert, but a couple things to remember:
Drills need to be charged ahead of time! Charge overnight (NOT 5 minutes before you need to use. Lesson learned.)
Once you’re finished drilling the holes, test out your largest electronic cords and make sure they fit through the hole. I eyeballed this when I did it and it wasn’t large enough. I then had to re-drill the holes AFTER I had already painted. Another lesson learned.
Once the holes were drilled, I sanded the entire box, including inside each of the drilled holes. Since this box hadn’t been painted before, the goal of sanding was to create a smooth surface. If you’re using an item that has been painted, stained or spray, the goal will be to strip away the previous application to ensure your paint will be able to ‘grip’ on to the wood. In general a light sanding will work for both. It’s human nature to oversand (is that a word?).
Paint away! I used paint from an old paint sample from our laundry room, but acrylic paint would work just fine as well. You’ll notice the bottom isn’t painted. I’m going to place some fun colored contact paper on the bottom to serve as a ‘place-mat’ so why spend time on something that will go unnoticed??
Two coats of paint later, we’re ready to accessorize! To add a pop of color, I put a piece of contact paper at the bottom. If contact paper throws you for a loop and you’re nervous about laying down contact paper due to potentially bubbling, you could skip pealing and just place inside. Yes, it’s kind of cheating, but who’s keeping tabs? OR you could just use standard scrap-booking paper and tape it down. I PROMISE no one is keeping tabs!
Now you’re ready to charge! Like I mentioned above, I spent some time figuring out what the best placement for each of my electronics would be. I strongly recommend doing this step BEFORE putting the washi tape labels on. Putting the larger electronic cords at the ends worked better for this size box, but it will take a little trial and error to see which ones fit best.
I’m a sucker for labels, but even more for this label maker. It’s portable and has an iphone app (doesn’t everything nowadays?), making it really easy to make labels. No need to run to our office to print labels on my computer. (Joe didn’t necessarily share my excitement in my new found ease in labeling 🙂 .)
UPDATE: a couple of you asked what the ‘charger’ was. We have a portable charger for when our phone battery is running low and we’re not near an outlet. Highly HIGHLY recommend.
Before applying the labels, add washi tape around each cord. I cut the ends at a diagonal and attached my clear labels on top.
Now that my electronics are organized, let’s hope I remember to CHARGE them! 🙂
Check out how my fellow bloggers transformed their thrift store finds!
Some of the links in this list are affiliate links. It doesn’t cost you any extra, but I earn a little commission if you decide to purchase. Regardless of whether or not I receive a commission, I only recommend products that I personally use and genuinely recommend! Thanks for helping support this site!
Although I could spend days organizing (loving every minute of it), it’s an awesome feeling to organize something in a mater of minutes. I’m not talking about picking up or simply moving clutter in to a container, but actually create a system to keep something organized.
That’s why I LOVE these cord organizers. Plus now I have a legit reason to hold on to toilet paper rolls 🙂 .
Hopefully I’m not alone in having WAY too many extra cords around the house. Admittedly I HATE getting rid of stuff, so keeping my belongings in a clean organized fashion is even more important. Well, extra cords were not high on that list. Jumbled in a container out of reach and out of site, I forgot we had so many extra cords and mistakenly bought more. Lesson learned. That was definitely motivation for me to get these organized.
This is SOOO incredibly easy it barely needs a tutorial. Simply ‘decorate’ your toilet paper rolls with your colorful washi tape in any way you want! Some washi tape is stronger than others, so if it doesn’t stick to the cardboard toilet paper roll, just add a bit of clear scotch tape to the ends.
Roll up your extra cords so that they’re a little longer than the toilet paper roll. And stuff them!
Simply place them in a Tupperware container. No more untangling or taking up too much space!
Now just don’t forget about them!
Some of the links in this post are affiliate links. It doesn’t cost you any extra, but I earn a little commission if you decide to purchase. Regardless of whether or not I receive a commission, I only recommend products that I personally use and genuinely recommend! Thanks for helping support this site!